Frequently asked questions

Without the hole, a vacuum would gradually form in the bottle and Blumat Easy would dispense less water or none at all.

A very small hole will suffice, e.g. using a pin. When topping up, you can simply put your finger over a small hole.

That depends on the size of the bottle you are using. With a 2-litre bottle, you can water with Blumat Easy for up to 10 days and Blumat Easy XL for up to 7 days.

There is a risk that the bottle will fall over. Larger bottles or canisters usually have a larger opening and Blumat Easy would not fit on these containers.

If the soil is dry or the plant is particularly thirsty, the roots actively absorb water from the clay cone.

The micropores in the clay cone have become clogged up or a layer of algae has formed inside.

Blumat Easy will last longer if it is thoroughly cleaned once a year. Lay the Blumat Easy in warm water for about five minutes. Then clean the inside of the clay cone with a small brush and sand down the outside with sandpaper.

No, Blumat Easy may only be used with plastic bottles.

Yes, Blumat Easy can be used to water fruit and vegetables without any worries. All Blumat Easy products have been tested according to the standards of the Austrian drinking water ordinance and are within all permissible limits. Blumat Easy products are free from BPA, PFAS and phthalates

Blumat Easy have been tested according to the standards of the Austrian drinking water ordinance and are within all permissible limits. However, the products are designed for watering plants and not for carrying drinking water. They are not certified for this purpose.