Water supply
Option A
Pressure reducer
- Connect the pressure reducer to a water tap or a pump with a compensation vessel.
- The pressure is regulated constantly to 1 bar.
- The plants may be standing up to 4 metres higher or 3 metres lower.
- Up to 250 Tropf-Blumat sensors can be supplied by one pressure reducer.
Video guide Products
Important note:
The pressure reducer must be protected against frost.
Option B
Tank connector
- Fit the tank connector to any container. To do this, drill a hole with a diameter of 12 mm.
- The tank must always be higher than the plants (water level at least 0.5 m and max. 14 metres higher).
- Fit the tank filter additionally, especially when using rain water.
Our recommendation: The water level should be at least 1 metre above the sensors.
Video guide Products
TIP: Install a shut-off valve in the feeding tube after the tank connector. This makes it easier to set and clean the tank later.
TIP: An opaque tank with lid reduces the growth of algae.
Tropf-Blumat User Manual
INTELLIGENT WATERING
DIE INTELLIGENTE BEWÄSSERUNG
L'ARROSAGE INTELLIGENT
L'IRRIGAZIONE INTELLIGENTE
LA IRRIGACIÓN INTELIGENTE
A IRRIGAÇÃO INTELIGENTE
DE INTELLIGENTE BEWATERING
DEN INTELLIGENTA BEVATTNINGEN
ÄLYKÄS KASTELUJÄRJESTELMÄ
DEN INTELLIGENTE VANDING
DEN INTELLIGENTE VANNINGEN
INTELIGETNE NAWADNIANIE
CHYTRÉ ZAVLAŽOVÁNÍ
INTELIGENTNÉ ZAVLAŽOVANIE
AZ INTELLIGENS ÖNTÖZÉS
SISTEM DE IRIGARE INTELIGENT
ИНТЕЛИГЕНТНОТО НАПОЯВАНЕ
ΤΟ ΕΞΥΠΝΟ ΠΟΤΙΣΜΑ
INTELLIGENTNE KASTMINE
VIEDĀ APŪDEŅOŠANA
IŠMANUSIS LAISTYMAS
INTELIGENTNI SISTEM ZA ZALIVANJE
INTELIGENTNO ZALIJEVANJE
INTELIGENTNO ZALIVANJE
AKILLI SULAMA
ИНТЕЛЛЕКТУАЛЬНЫЙ ПОЛИВ
インテリジェントな自動給水システム